Pic 1 Greddy lip has been adhered to the bumper cover using the Duramix. I used clamps where necessary to ensure that everything is where it needs to be. Pic 2 Closer look at the Greddy lip and the bumper on the left side. The clamps worked as needed. The biggest problem was doing this by myself. If I had to do it
again I would get someone to help. Trying to lay a bead of adhesive on the parts .. and .. hold the parts was a pain.
Filling the emblem pocket
Pic 3
Pic 4
Pic 5
Pic 3 Filled the emblem pocket with fiberglass/resin. Since this piece doesn't flex figured this would be ok. Pic 4 Sanded and a layer of flexible body filler (adhesive) used. Pic 5 Sanded and ready for little extra filler. Looking good.
Full bumper cover view
Pic 6
Pic 7
Pic 6 Still lots of work to do but progressing. Pic 7 No going back now!.
