|
|
Custom Bumper: Primer and Grille
|
|
At this stage the bumper is nearing completion. (could be considered complete other then paint but consideration has to be made for additional steps .. specificially the grille) |
 |
 |
| Puttied and Primed |
Pic 1
|
Pic 2
|
|
Pic 1 At this stage, the bumper has been filled, sanded and primered. Of course, was a bit more to it then that. You do that first part and then wet sand. High and
low places appear. You fill in the low places and knock a little off of the highs. Sand again, prime and repeat. This is at the 'good nuff' stage. I still need to wet sand with some
fine sandpaper but basically, it is finished.
Pic 2 The bumper cuves so that there is a 2" difference in the 35½" length.
|
| Mesh Grille |
Pic 3
|
Pic 4
|
Pic 5
|
|
Pic 3 I used an expanded steel mesh and 'smooshed it' into shape from behind.
Pic 4 Another view
Pic 5 The mesh painted black
|
© 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 eTraxx.com |
|
